VEGA-7.0/150mA High Frequency Mobile X-RAY Machine
Technichal Specification
| PARAMETER | SPECIFIED VALUE |
| Mains Voltage | 230VAC ± 10% |
| Frequency | 50 Hz |
| Power Output | 7.0kW |
| Generator Frequency | 40kHz |
| max mA | 150mA |
| KV Range | 40kV to 120kV |
| kV Accuracy | ±5kV |
| mAs Accuracy & range | ±10% & 1 to 200mAs |
| X-ray Tube | Stationary Anode |
| Target Angle | 15° |
| Focal Spot | 2.0 mm (Single focus) |
| Total Filtration | 2.5mmAI Eqv. |
| Inherent Tube Filtration | Min. 0.65 mm AI / 75 kV |
| Collimator | Manual |
| Exposure Release Switch | 2 Steps |
| Parameter Selection | kV & mAs |
| Up to 200 Pragrams | APR (Anatomical Programmed Radiography) |
| Conforms To Standards | IS:7620 Part-1 |
| AERB Approval | AERB Type Approved |
| Maximum Exposure time | 3.75 milli sec |
| X-ray film cassette holder size | 445-315 mm |
| Heat storage capacity | 42 KHU |
| Power Cable length | 3 meter |
Description
This machine is designed for easy use and high performance, suitable for various medical imaging needs. It features a sleek and lightweight design, AERB approval, and advanced specifications for reliability and accuracy.
Key Features:
- Over voltage protection
- Over current protection
- Overload protection for tube safety
- KV Increase & Decrease Switches
- mAs Increase & Decrease Switches
- Collimator Lamp ‘ON’ Switch
- Self diagnostic Programme with indicators
- APR mode with Anatomy Visuals
- Machine ON/OFF Switch.
- Stand by & Exposure Switch.
- Mobile Stand with 4-wheel design
- Light weight Spring Balance Stand
- Lead lined cassette storage box.
- Tube focus to floor distance of minimum 75 inch
- Tube focus to tabletop distance of minimum 46 inches
- Standard Radiography Table
- Braking system for parking, transport and emergency braking
- TFT Display (Optional)
- Soft touch Selection for KV & mAs
- High Frequency Smart Generator
- Constant output with lowest ripple
- Long Distance Recoil-able hand
- switch for operator Safety
- Digital display for KV & mAs supplied
- Incoming Voltage Indicator.
- Stand by (Ready) & X-Ray On Indicator.
- Error Provision Provided
- KV Error
- Filament Error
- Tube head Thermal Error
- Earth fault Error
- Electronic timer
